Commander Products

Showing all 10 results

  • Synthetic Enamel Wood & Metal

    COMMANDER SYNTHETIC ENAMEL is an oil modified alkyd-based enamel paint, specially formulated for interior and exterior metal, wood, and wall surfaces giving them a touch of brilliance and breathing colorful life for your home. This mat finish paint will provide lasting beauty even in harsh weather and help to prevent fungus growth. COMMANDER Synthetic Enamel provide best covering capacity under normal conditions with it bright crystal titanium.

    SURFACE PREPRATION
    New surface Masonry surfaces must be dry and free from dirt, grease and other contaminants. Smoothen the surface with sand paper. Clean off and dry. Metal Surface must be dry and free from dirt, grease and other contaminants. Ferrous substrate should be sanded or wire- brush to remove mill scales and rust. Clean off and dry.
    Previously painted surfaces: Any loose flaking paint film must be scraped off. Defected areas should be sanded and smoothened. For ferrous substrates, rust should be removed thoroughly. The entire surface must finally be dry and free from dirt, grease and contaminants. The scraped areas should be spot-primed prior to painting.

    PACKING SIZE: 3.64 Liter (Gallon) 0.91 Liter (Quarter)

    Read more
  • Super Emulsion

    COMMANDER PAINTS Super Emulsion is an excellent quality emulsion with improved coverage, binding and finish. It is specially developed for interior surfaces including brick work, plaster, concrete, wall board’s gypsum etc.

    SURFACE PREPRATION
    New, bare, old or previously painted surfaces must be clean dry and free from dust or wax. Clean the surface by rubbing down with abrasive paper. Brush down previously painted surface completely and make the surface smooth. For large holes and cracks use plaster of pairs or white cement allow to dry. Apply COMMANDER PAINTS filler in order to seal the surface from water and salts. Allow surface to dry completely. Then rub down the surface with abrasive paper and dust off. Now the surface will be smooth and ready for COMMANDER PAINTS SUPER EMULSION to be applied. Stir the paint thoroughly before use.

    TECHNICAL INFORMATION
    (Depends on temp, humidity, air movements and film thickness)
    Drying time 2-3hour after each coat
    Coverage 10-14m/liter/coat
    Thinner Clean water
    No. of coats 2-3
    Application Brush
    Cleaning With water

    PACKING SIZE: 14.56 Litre (Drummy) 3.64 Litre (Gallon) 0.91 Litre (Quarter)

    Read more
  • Weather Protection

    COMMANDER PAINTS Weather Protection is an excellent quality product. Which is specially formulated for use on all exterior surfaces. COMMANDER Weather Protection gives highly durable finishing long lasting protection and decoration to all exterior surfaces. The smooth finish of COMMANDER Weather Protection has the highest degree of durability and is resistance to all type of weather conditions. It is specially developed for exterior surfaces including brick work, plaster, concrete, wall board’s gypsum etc.

    SURFACE PREPRATION
    New, bare or previously painted surfaces must be clean dry and free from dust or wax. Clean the surface by rubbing down with abrasive paper. Brush down previously painted surface completely and make the surface smooth. For large holes and cracks use plaster of pairs or white cement allow to dry. Apply COMMANDER PAINTS filler in order to seal the surface from water and salts. Allow surface to dry completely. Then rub down the surface with abrasive paper and dust off. Now the surface will be smooth and ready for COMMANDER PAINTS Weather Protection to be applied. Stir the paint thoroughly before use.

    TECHNICAL INFORMATION
    (Depends on temp, humidity, air movements and film thickness)
    Drying time 2-4hour after each coat
    Coverage 10-14m/liter/coat
    Thinner Clean water
    No. of coats 2-3
    Application Brush, Roller, Spray
    Cleaning With water

    PACKING SIZE: 16 Litre (Drummy) 4 Litre (Gallon) 1 Litre (Quarter)

    Read more
  • Extra Smooth Wall Filling

    COMMANDER Wall putty is a ready to use high quality putty for interior use only. It forms and ideal base to give a smooth finish for water based paints. It should not be used on Exterior surface. COMMANDER Wall Putty ready for use putty is highly recommended where smooth performance is required. COMMANDER Wall Putty is designed for use on cement surfaces, concrete, chipboard, plywood etc.

    SURFACE PREPRATION:
    It is extremely essential to completely dry and free the surface from grease, dirt and dust by using sand paper or scrapers before applying COMMANDER Wall Putty. It is recommended that on previously painted surface, scrape to remove all old paint which is loose and flaking, apply a thin coat of COMMANDER Wall Sealer before applying COMMANDER Wall Putty for a better finish.

    DRYING TIME
    COMMANDER Wall Putty under normal conditions surface dries within 20 hours and is ready for over- coating finishing paint after 16 hours.

    COVERAGE:
    COMMANDER Wall Putty covers 5-7m per kg per coat.

    PACKING SIZE: 20 kg (Drummy) 5 kg (Gallon)

    Read more
  • Shoki’s Emulsion

    COMMANDER PAINTS Shoki’s Emulsion is an excellent quality emulsion with improved coverage, binding and finish. It is specially developed for interior surface including brick work, plaster, concrete, wall boards, gypsum etc.

    SURFACE PREPRATION
    New, bare, old or previously painted surfaces must be clean dry and free from dust or wax. Clean the surface by rubbing down with abrasive paper. Brush down previously painted surface completely and make the surface smooth. For large holes and cracks, use plaster of paris or white cement allow to dry. Apply COMMANDER PAINTS filler in order to seal the surface from water and salts. Allow surface to dry completely. Then rub down the surface with abrasive paper and dust off. Now the surface will be smooth and ready for COMMANDER PAINTS Shoki’s EMULSION to be applied. Stir the paint thoroughly before use.

    PACKING SIZE: 14.56 Litre (Drummy) 3.64 Litre (Gallon) 0.91 Litre (Quarter)

    Read more
  • Shoki’s Weather Shield

    COMMANDER PAINTS Shoki’s Weather Shield is an excellent quality product. Which is specially formulated for use on all exterior surface. Weather Shield gives highly durable finish long lasting protection & decoration to all exterior surface. The smooth finish of commander weather protection has the highest degree durability and is resistant to all types of weather conditions. It is specially developed for exterior surfaces including brick work plaster concrete, wall boards, gypsum etc.

    SURFACE PREPRATION
    New, bare, old or previously painted surfaces must be clean dry and free from dust or wax. Clean the surface by rubbing down with abrasive paper. Brush down previously painted surface completely and make the surface smooth. For large holes and cracks, use plaster of paris or white cement allow to dry. Apply COMMANDER PAINTS filler in order to seal the surface from water and salts. Allow surface to dry completely. Then rub down the surface with abrasive paper and dust off. Now the surface will be smooth and ready for COMMANDER PAINTS Shoki’s Weather Shield to be applied. Stir the paint thoroughly before use.

    PACKING SIZE: 16 Litre (Drummy) 4 Litre (Gallon) 1 Litre (Quarter)

    Read more
  • Shoki’s Wall Filling

    COMMANDER Shoki’s Wall Filling is high quality filler for all types of interior masonry surface such as brickwork, chipboard, plaster and cement. It is ready to use and easy to apply. It is specially developed with excellent filling properties ties. It given gives smooth finish for tips coats.

    SURFACE PREPRATION:
    New surfaces, must be clean dry and free from efflorescent salts, sand the surfaces with suitable and paper or sandstone to make the surface smooth. Dust off and apply and apply COMMANDER Wall Sealer for paper sealing from water and salts and allow to dry apply COMMANDER Shoki’s Wall Filling for old previously painted or uneven surfaces, remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper of stiff brush and dust off. For large hole and cracks, use plaster of Paris or white cement. Allow to dry. Prepare the surface by sending it with suitable sand paper or sand stone to make the surface smooth.

    PACKING SIZE: 20 kg (Dummy), 5 kg (Gallon)

    Read more
  • Super Wall Primer

    A water based primer that is suitable for masonry surfaces. It is formulated to prevent deterioration of emulsion paints by alkalinity of surfaces. As a sealer for masonry surfaces, Cement plaster, Brickwork, Hard/Soft boards, Concrete

    Features:

    Good adhesion
    Anti-fungus and algae resistance property
    Fast drying for convenient recoating and over coating
    Good alkaline and efflorescence resistance.

    Surface preparation:

    Surface must be clean, dry and stable
    Dirt/powder

    Clean with damp cloth. Mild detergent may be used.
    Plaster
    Remove by chisel, scraper, powder grinder etc. Replaster to a stable surface with an approved mortar mixture
    Moisture

    High moisture causes paint defect.
    Observe the following level prior to painting;
    Masonry-below 6%
    All water seepage must be checked.
    Paint

    Unstable old film removed by power brush or scraper whichever is appropriated.
    Fungus

    Wash off and treat with Commander Anti-Fungus solution.
    Cleaning: All equipment should be cleaned with water immediately after use.
    The information given is intended to give a description of the product performance under specific test conditions. Nevertheless, we cannot assume any responsibility for the use of it since circumstances under which the products are applied in practice are subjected to many variations. We reserve the right to alert the given data without notice.

    PACKING SIZE:

    16liter (Drummy), 4liter (Gallon).

    Read more
  • UNDER COAT Wood & Metal

    COMMANDER UNDER COAT provides adhesion to steel and scratch filling properties. It can be over coated with synthetic enamel, Autolacqurs and Hammer finishes.

    COMMANDER Under Coat can be applied ready for use by brush. COMMANDER Under Coat can be dried in 30 minutes and is re-coatable after 8-16 hours.

    PACKING SIZE: 3.64 Liter (Gallon) 0.91 Liter (Quarter)

    Read more
  • COMMANDER VARNISH

    Commander synthetic clear varnish is a top quality alkyd varnish. It has maximum spread and is excellent for making putty. Commander synthetic clear varnish can be used on interior surfaces. Where a high gloss varnish of utmost durability is required.

    SURFACE PREPRATION
    Apply the varnish in good drying conditions which should be as free from dust as possible. Commander Synthetic Clear Varnish may be applied coat on coal. However before the second coat is applied, the first coat should be allowed to dry thoroughly. When re-varnishing clean and rub down previous varnishing coats. Old perished varnish should be stripped with paint stripper. Commander Synthetic Clear Varnish can be applied ready for use by brush. For spray, it can be thinned as necessary with mineral or genuine turpentine. Commander Synthetic Varnish can be dried in 3-6 hour and is re-coatable after 16 hours.

    PACKING SIZE: 3 liter (Gallon), 0.75 liter (Quarter) and 750ml pack sizes.

    Read more